Siemens Sitrans P D76181 Manual Link — ^hot^

Appendix B of the manual (Electrical connections) shows pinouts: Pin 1 = V+, Pin 3 = V-, Pin 4 = HART (+), Pin 2 = not connected.

The Siemens SITRANS P D761-81 manual link provides users with essential information on the device's operation, installation, and maintenance. By downloading the manual, users can ensure optimal performance, accuracy, and reliability of the device. The manual link is a valuable resource for anyone working with the SITRANS P D761-81, including engineers, technicians, and maintenance personnel.

If your device physically shows "D76181" on a sticker near the terminals, but it is a DS III (e.g., a P300 or P410), the manual differs. In that case: siemens sitrans p d76181 manual link

If you still cannot find a match for your specific D76181 nameplate, contact Siemens Technical Support at 1-800-333-7421 (US) or +49 911 895-7222 (Global). Provide them the full and "Ser.No." from the device, and they will send you the exact batch-specific documentation.

: It uses a silicon pressure sensor and an overload diaphragm to protect the internal measuring cell from extreme pressure spikes. : Typically provides a 4 to 20 mA Appendix B of the manual (Electrical connections) shows

the pressure tapping point to allow condensation to drain back. Handle with Care:

4 to 20 mA with digital HART, PROFIBUS PA, or FOUNDATION Fieldbus communication. The manual link is a valuable resource for

: Many models in this series are designed for use in hazardous areas and require strict adherence to the or equivalent certificates listed on the nameplate. sitrans p - Siemens Support