When reinstalling the slide, ensure the diaphragm tab is seated in its notch. If it’s pinched, the vacuum seal will fail.
| Ref # | Part Name | Torque Spec (in-lbs) | Wear Limit | |--------|----------------|----------------------|-------------| | 1 | Vacuum Piston Assembly | N/A (hand-fit) | Scratches >0.2mm deep | | 2 | Diaphragm | N/A | Any tear, pinhole, or hardening | | 3 | Jet Needle (5D12-3) | N/A | Bend >0.1mm | | 4 | Main Jet (#125-#145) | 12-15 | Oval orifice | | 5 | Pilot Jet (#35-#42.5) | 10-12 | Clogged cross-drilled holes | | 6 | Float & Needle Valve | 7-9 | Float height out of spec |
When reinstalling the slide, ensure the diaphragm tab is seated in its notch. If it’s pinched, the vacuum seal will fail.
| Ref # | Part Name | Torque Spec (in-lbs) | Wear Limit | |--------|----------------|----------------------|-------------| | 1 | Vacuum Piston Assembly | N/A (hand-fit) | Scratches >0.2mm deep | | 2 | Diaphragm | N/A | Any tear, pinhole, or hardening | | 3 | Jet Needle (5D12-3) | N/A | Bend >0.1mm | | 4 | Main Jet (#125-#145) | 12-15 | Oval orifice | | 5 | Pilot Jet (#35-#42.5) | 10-12 | Clogged cross-drilled holes | | 6 | Float & Needle Valve | 7-9 | Float height out of spec | mikuni bds26 service manual