Omron G8b-201-01 Info

If you need the or a replacement suggestion , let me know.

You cannot drive this relay directly from a microcontroller (like an Arduino or PIC) because the coil requires more current than a logic pin can supply, and the coil voltage (12V) is higher than logic voltage (3.3V/5V). omron g8b-201-01

: Typically supports loads from 0.1W to 150W for modern electronic versions. : Approximately 28.0g. Common Issues & Solutions Hyperflash If you need the or a replacement suggestion , let me know

Failure of the G8B-201-01 typically manifests as turn signals that stay on without flashing, flash too rapidly ("hyper-flashing"), or do not activate at all. flash too rapidly ("hyper-flashing")