Fanuc 11m Parameter List Updated Jun 2026

| Param | Description | Typical Value / Bits | |-------|-------------|----------------------| | 0000 | Option bits (mirror image, DNC, etc.) | Binary (bit mask) | | 0001 | RS-232 / baud rate | e.g., 4800, 9600 bps | | 0012 | Axis assignment & rotation direction | Bits 0–5 | | 0100 | Servo motor type / pulse coder | 101–255 (machine specific) | | 0200 | Inch/Metric selection | 0 = mm, 1 = inch | | 0220 | G-code system A/B/C | 0, 1, or 2 | | 0300 | Positioning check width (µm) | 10–200 | | 0500 | Spindle max speed (RPM) | e.g., 6000 | | 0510 | Gear ratio (spindle to encoder) | 100–32767 | | 0700 | Work coordinate system presets | 0 = G92, 1 = G54+ | | 8000.0 | Parameter Write Enable (PWE) | 0 = locked, 1 = unlocked |

| Symptom | Check Parameter | |---------|----------------| | Axis moves wrong direction | 0012 bits | | No spindle speed display | 0500, 0510 | | RS-232 not communicating | 0001, 0020, 0021 | | Cannot change parameters | 8000.0 (PWE=1) | | Tool offset not applying | 0600–0640 format bits | fanuc 11m parameter list

| Parameter # | Description | | :--- | :--- | | | Rapid Traverse Time Constant . Controls ramp-up/down for rapid moves (G00). | | 0803 - 0805 | Cutting Feed Time Constant . Controls ramp-up/down for linear interpolation (G01). | | 0820 - 0822 | FL Signal (Feed After Interpolation) . Time constant for feedrate clamping. | | Param | Description | Typical Value /